The latest generation of the high-performance Fenix PD35 V3.0 pocket torch delivers a light output of up to 1700 lumens (ANSI) and a beam distance of up to 357 metres. Such excellent light output has been achieved by using the latest Luminus SFT-40 LED.

The torch is powered by a Li-ion 18650 2600 mAh rechargeable battery (included in the package) with its own micro-USB charging connector. The Fenix PD35 V3.0 features six lighting modes, which allow you to choose between high output and long runtime, which reaches up to 230 hours. One of the lighting modes is also a strobe, which is suitable for emergency situations. The torch is powered by digitally regulated constant current to ensure consistent light output even as battery voltage decreases (during gradual discharge). It is also equipped with battery charge status indication.

The PD35 V3.0 impresses not only with its compact size and high output, but also with its tactical switch and the option to attach the Fenix AER-02 cable switch. We can therefore recommend it not only to all outdoor enthusiasts, but especially to members of security services and hunters.

All torch parameters (light output, runtime on battery, water resistance, beam distance and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix PD35 V3.0 torch specifications

• Uses the top-performing Luminus SFT-40 LED with a lifespan of 50,000 hours.
• Six lighting modes: Turbo 1700 lumens (1.5 hours) → 600 lumens (2.5 hours) → 150 lumens (8.5 hours) → 50 lumens (26.5 hours) → 5 lumens (230 hours) - Strobe 1700 lumens (strobe with variable frequency). Light output and runtime are measured with the rechargeable Fenix Li-ion 18650 battery with a capacity of 2600 mAh (included in the package).
• Digitally regulated for constant brightness, intelligent overheat protection.
• Power supply: one Li-ion 18650 rechargeable battery or two disposable CR123A batteries.
• Supported power voltage 2.8–6.4 V, low battery warning.
• Due to mechanical reverse polarity protection, the rechargeable battery must have a protruding positive terminal.
• Older Fenix rechargeable batteries with a flat positive terminal cannot therefore be used.
• Smooth parabolic reflector for a light cone with a beam distance of 357 metres (31,900 cd).
• The torch has memory and will always switch on in the last set mode (does not apply to strobe).
• LED indicator in the side button will always display the battery charge status when the light is switched on (calibrated for use with Li-ion 18650 rechargeable batteries).
• Trapezoidal threads with increased wear resistance.
• Dimensions 13.4 cm (length) x 2.28 cm (body diameter) x 2.54 cm (head).
• Weight 83.5 grams (without rechargeable battery) or 133.5 grams (including rechargeable battery).
• Made from aircraft-grade hardened aluminium, durable finish - Type III hard anodized.
• Impact resistant from drops of up to 1 metre.
• Pronounced surface knurling for better grip, design prevents the torch from rolling on uneven surfaces.
• Waterproof and dustproof to IP68 standard (tested underwater at a depth of 2 metres for 30 minutes).
• Removable steel clip.
• Hardened ultra-clear glass lens with anti-reflective coating.
• Tactical switch at the end of the torch (momentary on/off function).
• The torch comes with a wrist strap, belt case, spare O-rings, Fenix 18650 2600 mAh rechargeable battery with USB and micro-USB charging cable.
• Optional accessories available for purchase include: Fenix AER-02 cable switch, red traffic cone AOT-S, diffuser AOD-S, red filter AOF-S+, green filter AOF-S+, blue filter AOF-S+, rotating bicycle mount, Fenix ALB-10 bicycle mount, BikeBlock cycle helmet torch mount, Fenix ALG-00 quick-release mount, Fenix ALG-01 rail mount, metal magnetic mount, ALP-10S case.

Use

• From the factory, there may be a black insulating cover inside the torch on the rechargeable battery. Remove it from the battery before first use.
• To switch on, press the switch located at the end of the torch; for momentary activation, hold the button gently.
• By pressing the side button at the head of the torch, you can cycle through five steady lighting modes at any time during operation.
• To switch to strobe mode, hold the side button for approximately 0.5 seconds.
• Intelligent overheat protection - if the torch temperature rises above 60 °C, it will automatically reduce output in gradual steps until its temperature stabilises. As soon as the torch temperature drops below 60 °C, the output will automatically increase back to the original level.
• Battery charge status indication - each time the torch is switched on, the indicator LED in the side button activates for three seconds. If the indicator diode glows green, the battery is charged to more than 85%. Green flashing means 50–85% capacity. If it glows red, it is charged to 25–50%. Red flashing indicates that less than 25% battery capacity remains (only works when using Li-ion 18650 rechargeable battery).
• Low battery warning - the torch will gradually automatically switch to the lowest mode; in the lowest mode, the indicator LED in the button will then flash red three times every 10 minutes. This indicates the need to charge the battery or replace it with a fully charged one.
• Charging - connect the USB cable to the side micro-USB connector on the rechargeable battery; during charging, the indicator light on the top of the battery glows red. Once fully charged, it glows green or blue. The charging time for a fully discharged battery is 3–3.5 hours.

Warning

Do not disassemble sealed parts in the torch head yourself, as this will void the warranty. Use only quality 18650 Li-ion rechargeable batteries or 3 V CR123A batteries to avoid damaging the torch. If the protective rubber O-rings appear damaged after prolonged use, replace them. The O-rings should also be lubricated to prevent rubber erosion. By following these rules, the torch will be properly protected against water.

If the torch flashes, does not switch to higher power modes or does not light up, it may be due to one of the following reasons:

• Batteries are almost discharged - charge the rechargeable battery or replace it.
• Contacts inside the torch are dirty - clean them with a cloth dampened in alcohol.
• The head, body or rear of the torch are loose - apply lubricant to the sealing O-rings and tighten the head and end of the torch firmly.

Warranty

Five-year warranty on the torch, two-year warranty on the rechargeable battery.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.