Fenix E06R is a larger variant of the successful miniature rechargeable flashlight Fenix E03R V2.0. Compared to it, it not only has higher output, but also ultraviolet light and a laser pointer. Despite the compact dimensions and a weight of only 54 grams, it offers a high luminous flux of up to 700 lumens (ANSI). The light beam evenly illuminates a wide area up to a distance of 110 meters. Power is provided by an integrated 750 mAh battery, which is charged via a modern USB-C connector on the side of the light. There are a total of four white light modes, UV light with a wavelength of 365 nm at 580 mW, a red laser (pointer ≤0.39 mW) and several so-called Breathing light modes - lights around the switch button of 0.5 to 1 lumen, which you can use for discreet signaling or identifying the location of the light. The light is supplied with a sturdy clip, so you can attach it to a pocket, backpack strap or hat visor and free your hands while lighting. Thanks to the magnet in the tailcap, you can attach it to anything iron. The battery charge level indicator in the button is also practical. This pocket flashlight is great for EDC and thanks to its small size, flat shape and weight you can always have it with you.

All parameters of the light (luminous flux, runtime on battery, waterproofness, shock resistance and range) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix E06R flashlight specifications

• Two white Luminus SST-12 LEDs are used, a UV diode with a wavelength of 365 nm Luminus SST-08 and a class 1 red laser, all with a lifespan of 50,000 hours.
• Four white light modes: 700 lumens (1.3 hours) -> 150 lumens (2.8 hours) -> 30 lumens (12 hours) -> 5 lumens (60 hours).
• UV light: 580 mW / 365 nm.
• Red laser (pointer): ≤0.39 mW.
• Pulsing light around the switch button (Breathing light): red flashing, blue flashing, red and blue pulsing at 1 lumen and RGB pulsing at 0.5 lumen.
• The light is powered by a built-in rechargeable battery with a capacity of 750 mAh.
• Battery charge level indicator in the button.
• Charging via a modern USB-C connector, which is waterproof inside.
• Memory for the last set white light output mode.
• Intelligent overheat protection.
• Clip for attaching to a backpack strap, pocket, hat visor, etc.
• CNC machined body made of aluminum alloy with Type III hard anodized finish against scratching.
• Dimensions 6.9 cm (length) x 2.9 cm (width) x 1.6 cm (height).
• Range 110 meters (3100 cd).
• Weight 54 grams (including battery).
• Waterproof according to IP66 standard (resistant to powerful water jets from all directions).
• Shock resistant to a drop from a height of 1 meter.
• Included in the package is a keyring, wrist strap and a USB-C charging cable.
• It is possible to purchase an adapter from micro-USB to USB-C.

Usage

To turn the white light on or off press and hold the main button for about 0.5 seconds. You can switch output modes at any time during operation by pressing the button. To turn on the Breathing light, turn the light off and quickly press the button twice. To turn it off, hold for 0.5 seconds.

UV light is turned on and off by holding the purple button on the side of the light for about 0.5 seconds.

Red laser is turned on and off by holding the red button on the side of the light for about 0.5 seconds.

Control buttons can be locked to prevent accidental activation, for example during transport in luggage - to lock, turn the light off and hold both the red and purple buttons on the side of the light for 2 seconds. The light will flash twice to indicate locking. To unlock the buttons, hold both colored buttons again for 2 seconds.

Battery charge indication - with the light off, briefly press the main button once, which will illuminate a small LED in the button for three seconds. Green light indicates the battery is charged at 100-85%, green flashing 85-50%, red light indicates the battery is charged at 50-25% and red flashing indicates the battery is charged at less than 25%.

Overheat protection - if the temperature of the light exceeds 65°C, the output will be automatically reduced. Once the temperature drops below 65°C, the output will be increased again.

Low battery warning - the light will gradually automatically switch to the lowest output mode and the indicator LED in the switch button will start flashing red.

Charging

• Connect the light via the USB-C cable to a computer, USB wall adapter or car USB adapter. You can also use any mobile phone charger with a USB-C connector for charging if necessary.
• During charging the indicator LED in the button lights red, after full charge it lights green.
• The used battery does not suffer from memory effect, so the light can be charged at any time.

Warning

• Do not disassemble sealed parts yourself, this will void the warranty.
• If the light does not switch to higher output modes, or does not light up, the battery is discharged - charge the light.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.